Skip to content
Laurel Plate

Uploading RAW files

Documentation. Updated October 21, 2026.

Laurel Plate accepts the file your camera wrote and nothing else touches it. This page covers the three ways to upload, how resuming works and what to do when a checksum fails.

Choose an uploader

UploaderBest forLimits
Plate Loader 3.4Full cards, watch folders, overnight jobs100 GB per file, 8 parts in parallel
Web uploaderA few files from a borrowed laptop20 GB per file, 4 parts in parallel
plate uploadScripts and serversSame as Plate Loader

Upload a card with Plate Loader

  1. Install Plate Loader 3.4 from your account page. It runs on macOS 12 and later, Windows 10 and later, and Linux with glibc 2.31 or newer.
  2. Sign in, then choose Add folder and pick the card or the folder you copied it to.
  3. Choose a destination: an existing job folder or a new one. The loader suggests a name from the capture date, for example 2026-10-17 Hollis wedding.
  4. Press Upload. Files are hashed first, then sent in 64 MB parts. The queue shows speed, parts remaining and the checksum state of each file.
Keep the card in the reader until every file shows a green check. The check means the server computed the same SHA-256 as your machine did, not merely that the bytes arrived.

Watch folders

A watch folder uploads anything new that appears inside it, once the file has stopped growing for 10 seconds. Tethered shooters point their capture software at a watch folder and clients see frames in a live gallery within a minute or two. Watch folders skip files ending in .tmp, .part and .xmp-lock.

Resuming

Every upload has an ID that survives restarts. If you quit the loader, lose power or change networks, reopen it and the queue resumes at the first part that was not acknowledged. Partly uploaded files are kept for 7 days, then discarded and not charged to your storage.

When a checksum fails

A failed check means the file on the server is not the file on your disk. The upload is held in a quarantine state and does not show in galleries. Press Retry file to re-send only the parts whose hashes differ. If it fails twice, the cause is usually one of these:

  • The file changed on disk while uploading, common with catalog software writing sidecars. Close the catalog and retry.
  • A flaky card reader. Copy the file to your internal drive first and upload that copy.
  • A network device that rewrites traffic in transit. Switch the loader to Use port 8443 in Network settings.

Folder structure and naming

Laurel Plate keeps your folder tree and your file names. Two files with the same name in different folders are fine; in the same folder the second is stored as name (2).cr3 and the loader tells you. Names can be 255 characters and any Unicode except slashes.

Supported formats

CR2, CR3, CRW, NEF, NRW, ARW, SR2, RAF, ORF, RW2, 3FR, FFF, IIQ and DNG are recognised as RAW and get embedded previews extracted. TIFF, PSD, PSB, JPEG, HEIC, MP4 and MOV are stored as ordinary originals. Anything else uploads as a plain file with no preview.